Suction Blasting Cabinet 4060

- Also available as Pressure Blasting Cabinet -

The latest model 4060 is the largest suction blasting cabinet in our assortment of blasting cabinets with blasting material circulation. We do not recommend quartz sand and slag as abrasives, but you may use any other kind that is commercially available.

The blasting gun is operated by hand but can also be locked into an arbitrarily fixable nozzle holder. The blasting process can be controlled by a foot switch. Two integral gloves which are padded on the inside and coated with rubber on the outside provide a comfortable arm support.

A large window allows unhindered insight into the cabinet. Within the cabine, good and consistent illumination prevails due to the two dust-proof tubular lamps (36 W compact fluorescent lamps) made of borosilicate glass.

By a flexible hose, the blasting cabinet is connected to a separate extraction unit of the type AE-T 0,5. The extraction unit consists of a ventilator, a filter chamber with a pocket filter, a supporting frame, a manual cleaning mechanism and a dust drawer. The dusty air is cleaned within the pocket filter and afterwards released into the atmosphere.

Technical data of the blasting cabinet
Overall size	W 1650 mm x D 1430 mm x H 1970 mm
Blasting chamber	W 1515 mm x D 1340 mm x H 1185 mm
Weight	appr. 261 kg
Varnish	grey / blue (Extra charge for special lacquering)
Compressed air connection	½" hose
Compressed air demand	see Air Table
Blasting gun	works according to the venturi principle with hardened nozzle or carbide metal nozzle
Window	480 x 300 mm (Safety glass pane with foil that can be glued in)
Electrical connection	16 A / 400 V

Technical data of the extraction unit AE-T 0,5
Overall size	W 810 mm x D 685 mm x H 1360 mm
Weight	appr. 100,5 kg
Aspiration port	Ø 100 mm
Motor	0,55 kW / 400 V / 50 Hz / 3000 U/min. / 1,38 A
Electrical connection	400 V
Varnish	grey / blue
Filter material	polyester needle-felt
Size of filter	5,0 m²
Air output	1000 m³/h (Ventilator output)
Compression	1150 PA
Fan impeller	Ø 180 mm x 85 mm height
Residual dust content	appr. 1,0 mg / m³ (differs according to abrasive used)