Phone: +49 9085 524 | info@radler-ruf.de

Suction Blasting Cabinet 4050

Suction Blasting Cabinet 4050Our model 4050 is a powerful suction blasting cabinet for all commercially available abrasives. The work pieces can be put into the cabinet via two side loading doors.

Two integral gloves which are padded on the inside and coated with rubber on the outside provide a comfortable arm support. 

A large window allows unhindered insight into the cabinet. Within the cabinet, good and consistent illumination prevails due to the dust-proof tubular lamp made of duran glass (borosilicate glass) with ballast and PL lamp 36 W.

By a flexible hose, the blasting cabinet is connected to a separate dry extraction unit of the type AE-T 0,5. The extraction unit consists of a ventilator, a filter chamber with a pocket filter, a supporting frame, a manual cleaning mechanism and a dust drawer. The dusty air is cleaned within the pocket filter and afterwards released into the atmosphere.
saugstrahlkabine 4050 zyklon


On demand, the blasting cabinet can be equipped with a unit for cleaning the abrasive material (cyclone). The cyclone 600 shown on the photo on the left side (cleaner for abrasive material 16,8 m³/min., 1,1 kW) consists of a ventilator, precleaner, filter and collection hopper for abrasive material and is equipped with a filling and a cleaning flap. Within the cyclone the blasting dust is already separated from the abrasive material and transported to the filter box. The air is cleaned inside the filter box and released to the work space whereas the cleaned abrasive material is led back to the working circuit.

 

Technical data of the blasting cabinet
Overall size W 1610 mm x D 1070 mm x H 1720 mm
Blasting chamber W 1485 mm x D 995 mm x H 940 mm
Weight appr. 190 kg
Varnish grey / blue (Extra charge for special lacquering)
Compressed air connection ½" hose
Compressed air demand see Air Table
Blasting gun works according to the venturi principle with hardened nozzle or carbide metal nozzle
Window 480 x 300 mm (Safety glass pane with foil that can be glued in)
Electrical connection 16 A / 400 V

 

Technical data of the extraction unit
Overall size W 810 mm x D 685 mm x H 1360 mm
Weight appr. 100,5 kg
Aspiration port Ø 100 mm
Motor 0,55 kW / 400 V / 50 Hz / 3000 U/min. / 1,38 A
Electrical connection 400 V
Varnish grey / blue
Filter material polyester needle-felt
Size of filter 5,0 m²
Air output 1000 m³/h (Ventilator output)
Compression 1150 PA
Fan impeller  Ø 180 mm x 85 mm height
Residual dust content appr. 1,0 mg / m³ (differs according to abrasive used)

Related Posts

Service Number

Do you have any questions or comments about our products?
We'll be happy to help you:

Tel: +49 (0)9085 524

Service-Telefon

News

Radler & Ruf is a member of the DONAURIES brand

Top arbeitgeber

certificates

Our employees are certified by:

Certifications, training and further education

These companies trust in our innovative solutions

View all references

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.

Ok