Suction Blasting Cabinet 2642/8

The suction blasting cabinet 2642/8 of the professional line was especially designed for a typical workshop equipment.

The blasting gun is operated by hand but can also be locked into an arbitrarily fixable nozzle holder. The blasting process can be controlled by a foot switch. Two integral gloves which are padded on the inside and coated with rubber on the outside provide a comfortable arm support.

The work pieces can be put into the cabinet via two side loading doors. A large window allows unhindered insight into the cabinet. Within the cabinet, good and consistent illumination prevails due to the dust-proof tubular lamp made of duran glass with ballast and PL lamp 24 W.

By a flexible hose, the blasting cabinet is connected to a separate extraction unit of the type AE-T 0,5. First, the dusty air is cleaned in the integral pocket filter and then released into the atmosphere. The extraction unit consists of a manual cleaning mechanism, ventilator, dust drawer and a filter chamber (with pocket filter and supporting frame).

Technical data of the blasting cabinet
Overall size	W 1200 mm x D 1010 mm x H 1720 mm
Blasting chamber	W 1070 mm x D 925 mm x H 940 mm
Weight	appr. 150 kg
Varnish	grey / blue (Extra charge for special lacquering)
Compressed air connection	½" hose
Compressed air demand	see Air Table
Blasting gun	works according to the venturi principle with hardened nozzle or carbide metal nozzle
Window	480 x 300 mm (Safety glass pane with foil that can be glued in)
Electrical connection	16 A / 400 V

Technical data of the extraction unit
Overall size	W 810 mm x D 685 mm x H 1360 mm
Weight	appr. 100,5 kg
Aspiration port	Ø 100 mm
Motor	0,55 kW / 400 V / 50 Hz / 3000 U/min. / 1,38 A
Electrical connection	400 V
Varnish	grey / blue
Filter material	polyester needle-felt
Size of filter	5,0 m²
Air output	1000 m³/h (Ventilator output)
Compression	1150 PA
Fan impeller	Ø 180 mm x 85 mm hight
Residual dust content	appr. 1,0 mg / m³ (differs according to abrasive used)