Suction Blasting Cabinet 2642/6

The suction blasting cabinet 2642/6 is a powerful cabinet with blasting material circulation for all kinds of abrasives.

The blasting gun is operated by hand but can also be locked into an arbitrarily fixable nozzle holder. The blasting process can be controlled by a foot switch.

The work pieces can be put into the cabinet via two side loading doors. Two integral gloves which are padded on the inside and coated with rubber on the outside provide a comfortable arm support.

A large window allows unhindered insight into the cabinet. Within the cabinet, good and consistent illumination prevails due to the dust-proof tubular lamp made of duran glass (borosilicate glass) with ballast and PL lamp 24 W.

By a flexible hose, the blasting cabinet is connected to a separate extraction unit of the type AE-T 0,4. The extraction unit consists of a ventilator, a filter chamber with a pocket filter made of polyester fleece - dust class "M", a supporting frame, a manual cleaning mechanism with compressed air and a dust drawer.

Technical data of the blasting cabinet
Overall size	W 1000 mm x D 760 mm x H 1720 mm
Blasting chamber	W 870 mm x D 675 mm x H 940 mm
Weight	appr. 110 kg
Varnish	grey / blue (Extra charge for special lacquering)
Compressed air connection	½" hose
Compressed air demand	see Air Table
Blasting gun	works according to the venturi principle with hardened nozzle or carbide metal nozzle
Window	480 x 300 mm (Safety glass pane with foil that can be glued in)
Electrical connection	16 A / 400 V

Technical data of the extraction unit AE-T 0,4
Overall size	W 640 mm x D 685 mm x H 1360 mm
Weight	appr. 82,5 kg
Aspiration port	Ø 100 mm
Motor	0,55 kW / 400 V / 50 Hz / 3000 U/min. / 1,38 A
Electrical connection	400 V
Varnish	grey / blue
Filter material	polyester needle-felt
Size of filter	3,5 m²
Air output	1000 m³/h (Ventilator output)
Compression	appr. 1150 PA
Fan impeller	Ø 180 mm x 85 mm height
Residual dust content	appr. 1,0 mg / m³ (differs according to abrasive used)